- 您现在的位置：买卖IC网 > Sheet目录197 > 84324LX (Switchcraft Inc.)SWITCH ROCKER 1A 30V
EN3 MINI WEATHERTIGHT CONNECTOR SERIES
42
CONNECTORS & RECEPTACLES
?
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
CRIMP CONTACT
CRIMP TOOLS
INSERTION INSTRUCTIONS
Part Number
EN3INS16
EN3INS20
EN3CR
EN3CRAUTO
EN3POS16
EN3POS20
Tool Description
Insertion/Extraction Tool for 16 AWG
Insertion/Extraction Tool for 20 AWG
Crimp Hand Tool
Pneumatic Crimp Tool
Positioner for 16 AWG contacts and pins
Positioner for 20 AWG contacts and pins
CRIMP CONTACT
EXTRACTION INSTRUCTIONS
NOTE: A positioner must be used with the
EN3CR and EN3CRAUTO.
Note: Solder and PC contacts are factory assembled
CORD CONNECTOR ASSEMBLY INSTRUCTIONS
STEP 1
Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp
housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be
inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable
clamp housing in the order and position shown.
IN-LINE
CABLE
BOOT
COUPLING
RING
CORD
CONNECTOR
CABLE
BOOT
CABLE CLAMP
HOUSING
CONNECTOR
CABLE CLAMP
HOUSING
CONTACT PINS
O-RING
(MOLDED ONTO
CONTACT PINS
CORD CONNECTOR)
STEP 2
Next, strip the cable .218" as shown and begin soldering conductors to pins, or insert contacts crimped on wire starting
with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor
in the center.
3/8"
MAX.
7/32"
SOLDER
NOTCH (PIN #1
INDICATOR)
CORD
CONNECTOR
9/32"
3/8"
MAX.
7/32"
SOLDER
NOTCH (PIN #1
INDICATOR)
IN-LINE
CONNECTOR
9/32"
STEP 3
Push the cable clamp housing forward until it locks
into the connector body and snap the two clamps
into their compartments.
CORD CONNECTOR
CABLE CLAMPS
IN-LINE CONNECTOR
CABLE CLAMPS
STEP 4
CORD CONNECTOR
IN-LINE CONNECTOR
Finally, push the boot all the way forward to seat tightly
onto the cable clamp housing.
Remember: Cord connectors will not mate with each other. For cord-to-cord connection,
your customer must order a cord connector plus an in-line connector.
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
www.switchcraft.com
? Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
8444-21A1-RK-TP
IC SOCKET 44POS PLCC SMD W/POST
8445-7.5
COLD SHRINK .35-.72 X 7.5" GRY
8452-11B1-RK-TP
IC SOCKET 52POS PLCC THRU-HOLE
848-06/002
FILTER POWER LINE EMI FAST ON 6A
848-10/003
FILTER POWR LINE EMI FAST ON 10A
848-20/004
FILTER POWR LINE EMI FAST ON 20A
849-03/001
FILTER POWER LINE EMI FAST ON 3A
849-06/002
FILTER POWER LINE EMI FAST ON 6A
相关代理商/技术参数
84324N
功能描述:3/8"DRIVE 7/16" DEEP IMPACT SOCK 制造商:apex tool group 系列:* 零件状态:在售 标准包装:10
843-250G
功能描述:化学物质 SILVER COATED COPPER 250G (8.8 OZ) LIQUID
RoHS:否 制造商:3M Electronic Specialty 产品:Adhesives 类型:Epoxy Compound 大小:1.7 oz 外壳:Plastic Tube
843251AG-04
制造商:Integrated Device Technology Inc 功能描述:843251AG-04 - Rail/Tube
843251AG-04LF
功能描述:时钟发生器及支持产品 RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56
843251AG-04LFT
制造商:Integrated Device Technology Inc 功能描述:PLL Clock Synthesizer Single 8-Pin TSSOP T/R 制造商:Integrated Device Technology Inc 功能描述:8 TSSOP (LEAD-FREE) - Tape and Reel
843251AG-04T
制造商:Integrated Device Technology Inc 功能描述:843251AG-04T - Tape and Reel
843251AGI-04
制造商:Integrated Device Technology Inc 功能描述:FEMTOCLOCKS- CRYSTAL-TO-3.3V LVPECL CLOCK GENERATOR - Rail/Tube
843251AGI-04LF
功能描述:时钟发生器及支持产品 RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56